In the use of LED electronic screens, I believe many people have encountered such problems. That is how to change the content on the LED video screen. Here are a few simple ways to change the video of the led screen in the software.
There are many ways to change the content. I will provide you with two simple ways in detail. The first is to change the font and parameters through the data cable. First connect to the computer, create a new file, open the control software of the LED electronic screen, and set the LED electronic screen parameters. Well, this option generally requires a password, (most of the initial password is 888) here is mainly to set the time format, after selecting it, the upper left corner is defaulted. You can turn on the zoom adjustment. Then it is to modify the content and format, here you need to use the LED SHOW TW graphic editor to assist in completion. Click Send when you are done. Finally, do not forget to scan and save.
The second type: change the font and parameters through the USB flash drive, click the USB download in the computer software, select the proofreading, and save the set parameters and changes in the USB flash drive. After the data is saved, the USB flash drive is inserted into the USB interface of the control card. The specific operation is as follows.
1. Find the control card model
2. Open the software
3. Set parameters
4. Scan configuration
5. Save the configuration.
Finally, click on the usb download to copy the changed content directly with the USB flash drive to the LED electronic screen for replacement. In addition to the above two methods, there are also direct changes to content parameters through the phone. For example, send text messages to modify the content. Download the WeChat app to change content, etc.