After the purchase of LED electronic display, due to some factors that can not be installed immediately, it is usually necessary to save the LED electronic display. LED display is a precise electronic product, which has high requirements for storage mode and environment, so it may be damaged accidentally. Today, we will introduce the correct storage LED electronic screen from the professional perspective of LED electronic screen manufacturers.
The storage LED electronic screen needs attention at 8 o’clock.
1. After cleaning the position of the box, put it on the pearl surface.
2. It is forbidden to stack more than 10 modules in LED electronic screen. After the modules are stacked, the lamp faces face each other and use pearl face to separate.
3. The layout of LED electronic screen box suggests that when the light needs to be placed horizontally, when too many supports are needed to work, special attention should be paid to protection, and it is forbidden to use the support in the position with large vibration.
4. Gently pick up the display shell, when landing, please be careful not to knock the back part against the floor.
5. All employees need wireless defensive electric bracelets during installation or maintenance.
6. Prevent hanging electric Bracelet when installing LED electronic screen
7. When carrying the box, it should be lifted, not pushed or pulled on the ground. This will make the bottom uneven and damage the bottom module. The box should be balanced in the process of suspension, and should not be swayed or rotated in the air. When installing the box or module, it should be handled with care, and throwing is strictly prohibited.
8. If it is necessary to adjust the LED electronic screen products, it is strictly forbidden to strike the metal part of the box with a rubber hammer to strike the module. Squeezing, collision and other actions between modules are strictly prohibited. In case of abnormal clearance and position, it is strictly forbidden to knock the box and module with a hammer and take out the foreign matter before use